How do I put my Plantronics legend in pairing mode?

How do I put my Plantronics legend in pairing mode?

Tap the voice button and then say “pair” or press and hold the call button until you hear “pairing.” Activate Bluetooth on your phone and set it to search for new devices. Select “PLT_Legend.” If your phone asks for a passcode, enter four zeros (0000); otherwise, accept the connection.

How do I pair my Plantronics Legend headset to my phone?

Go to Settings menu on the Android phone. Ensure Bluetooth is enabled, and then tap Bluetooth to access the settings. Tap Search or Scan (depending on the phone) so the phone can locate the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.

How do I put my Plantronics wireless headphones in pairing mode?

To pair your BackBeat FIT to your phone:

  1. Starting with your headset powered off, press and hold the power button until the LED flashes red and blue.
  2. Activate Bluetooth on your phone and set it to discover new devices. To do so:
  3. Tap PLT_BBT to complete the pairing.

How do I make my Plantronics discoverable?

Start with your headset powered on. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.

How do you pair a Bluetooth earpiece?

How to pair Bluetooth headphones with your phone

  1. Open the Settings app on your phone.
  2. Tap Connected devices.
  3. Tap Pair new device.
  4. Make sure your headphones are in pairing mode (see the owner manual on how to do this).
  5. Tap the headphones under the list of available devices. Source: Joe Maring / Android Central.

How to pair TaoTronics?

Taotronics Soundbar Bluetooth Pairing. To connect your Taotronics soundbar Bluetooth, follow these steps: Plug the soundbar to power, press and hold the POWER button until you hear a beep. The device is in the Bluetooth mode initially. When the indicator begins to flash fast, activate the Bluetooth function on your device and search for devices

How to pair Plantronics legend Bluetooth to iPhone 6 Plus?

Turn off the Bluetooth on your iPhone 6.

  • Turn off your Plantronics headset.
  • Repeat the steps 1 from 6,as discussed in the previous section.
  • How to connect Plantronics PLT to computer?

    Make sure your headset is charged. Depending on your headset model,the power light should be lighting up solidly—meaning it’s lit up but not flashing—when the headset is fully

  • Turn your headset on. There are a number of ways to turn on a pair of Plantronics headset,but all require you to switch on the Power button,which
  • Enable Pairing mode.
  • How to connect Plantronics headset to computer?

    – 2-1. Connect the telephone interface cable to the telephone interface cable jack on the base. – 2-2. After disconnecting the handset coil cord from the desk phone, connect the telephone interface cable to the now open handset port on the desk phone. – 2-3. Connect the handset coil cord to the telephone interface cable junction box.

    Related Posts