How do you calibrate a Raven flow meter?

1. Enter a meter cal number of 10 [38].
2. Enter a total volume of 0.
3. Switch all booms off.
4. Remove a boom hose and place it in a calibrated 5 gallon [19 liter] container.
5. Turn on the boom and master switches.
6. Pump exactly 10 gallons [38 liters].
7. The readout in total volume is the new meter cal number.

How do I adjust my flow meter calibration?

Master Meter Calibration Procedures To perform Master meter calibration: Place the master meter in series with the flow meter under test. Compare the readings of the master flow meter and flow meter using a measured volume of liquid. Calibrate the flowmeter under test to conform with the master flow meter calibration.

How do you adjust a Raven flow meter?

How do I know if my flow meter is working?

Take a photo of the flow meter DIAL. Make a note of the TOTAL FLOW from the report “Total Water Use”. Run the system for a day’s watering. Take a second photo of the flow meter DIAL.

Which flow meter is more accurate?

Coriolis mass flow meters produce the most accurate for most liquids but are expensive. They have the advantage of not needing any knowledge about the fluid being carried. Thermal mass flow meters are a less accurate but still direct measurement method.

How do I contact Raven Industries toll free?

Raven Industries Toll Free (U.S. and Canada): (800)-243-5435 Applied Technology Division or Outside the U.S. :1 605-575-0722 P.O. Box 5107 Fax: 605-331-0426 Sioux Falls, SD 57117-5107 www.ravenprecision.com www.ravenhelp.com SCS 440™ Serial Interface Installation & Service Manual (P/N 016-0159-822 Rev D 8/11 E18056) Title untitled Created Date

What is the warranty on MY Raven product?

This warranty covers all defects in workmanship or materials in your Raven Applied Technology Division product under normal use, maintenance, and service. Raven Applied Technology Division products are covered by this warranty for 12 months after the date of purchase.

How do I get support with MY Raven system?

•If you require assistance with any portion of the installation or service of your Raven equipment, contact your local Raven dealer for support. •Follow all safety labels affixed to the system components. Be sure to keep safety labels in good condition and replace any missing or damaged labels.

Is Raven Industries liable for repairs made outside of their facilities?

54 SCS 440 Installation & Service Manual Raven Industries will not assume any expense or liability for repairs made outside our facilities without written consent. Raven Industries is not responsible for damage to any associated equipment or products and will not be liable for loss of profit or other special damages.