Why is HDHomeRun not working?

Unplug the power cord from the HDHomeRun, count to ten, and plug it back in. On the CableCARD tab, run a channel scan. Open a support ticket. Make sure to include the 8 digit device ID for your HDHomeRun so our support personnel can review your diagnostic data.

How do I use HDHomeRun app?

Launch the HDHomeRun app to start watching TV. Pressing the up or down arrows on remote or keyboard, or hover mouse over the right hand side to bring up the channel selector. Click or tap on the screen (or press the select button on a remote) to bring up the user interface.

How do I activate my HDHomeRun DVR?

Click on the DVR tab in HDHomeRun Setup. Check the “Use this PC for making recordings” box. Click OK to enable the DVR and close the HDHomeRun Setup program.

Why doesn’t WMC find TV tuners?

However, WMC doesn’t find TV tuners. So far I’ve tried turning off firewall completely, and following these steps: Open HDHomeRun Setup and verify that the tuners are found and that no UPnP error is received. Open Control Panel, select View network status and tasks, and make sure the network is listed as Home/Private network.

Why does Windows Media Center report no tuners found?

Windows Media Center reports No tuners found when trying to complete TV setup – HDHomeRun PRIMEBack to top Open HDHomeRun Setup and verify that the tuners are found and that no UPnP error is received. Open Control Panel, select View network status and tasks, and make sure the network is listed as Home/Private network.

Why can’t I connect to HDHomeRun with WMC?

If you are are using your HDHomeRun with WMC in a Domain environment, you may need to go into the Advanced Firewall Configuration and change the Inbound connections behavior to Block rather than Block all connections. This indicates that your cable provider is encoding channels in a format that confuses WMC.

How to fix UPnP error on HDHomeRun?

So far I’ve tried turning off firewall completely, and following these steps: Open HDHomeRun Setup and verify that the tuners are found and that no UPnP error is received. Open Control Panel, select View network status and tasks, and make sure the network is listed as Home/Private network.