Which is better to use I2C or SPI?

Overall, SPI is better for high speed and low power applications, while I2C is better suited for communication with a large number of peripherals, as well as in situations involving dynamic changing of the primary device role among peripherals on the I2C bus.

Which of the following is the disadvantage in SPI over IIC?

Which of the following is the disadvantage in SPI? Explanation: Requires more pins on IC package than I2C, even in the three wire variant. 11.

Is SPI fast?

The SPI bus can run at high speed, transferring data at up to 60 Mbps over short distances like between chips on a board. The bus is conceptually simple, consisting of a clock, two data lines, and a chip select signal.

Is I2C high speed?

The high-speed variant of the I2C bus allows communication up to 3.4 Mbit per second. Both, master and slave device must be highspeed-enabled in order to benefit from this increase. High-speed IC devices are downward compatible allowing for mixed bus systems.

Is I2C SPI?

SPI and I2C were both conceived in the 1980s—SPI by Motorola and I2C by Philips (now NXP). SPI exists as a de facto standard, while I2C is more formalized. Both are synchronous protocols, appropriate for short distance communications, and they generally operate in the 3.3 or 5V range.

Is I2C slower than SPI?

I2C is a two wire protocol and SPI is a four wire protocol. I2C supports clock stretching and SPI does not have clock stretching. I2C is slower than SPI. I2C has extra overhead start and stop bits and SPI does not have any start and stop bits.

Which is better, SPI or I2C?

I²C requires only two wires,while SPI requires three or four.

SPI supports higher speed full-duplex communication while I²C is slower.

I²C draws more power than SPI.

I²C supports multiple devices on the same bus without additional select s

What is the difference between I2C and SPI?

I2C is half duplex communication and SPI is full duplex communication.

I2C supports multi master and multi slave and SPI supports single master.

I2C is a two wire protocol and SPI is a four wire protocol.

I2C supports clock stretching and SPI does not have clock stretching.

I2C is slower than SPI.

Is SPI the same as I2C?

The important difference between I2C and SPI ( I2C vs SPI ) communication protocol. I2C can be multi-master and multi-slave, which means there can be more than one master and slave attached to the I2C bus. SPI can be multi-save but does not a multi-master serial protocol, which means there can be only one master attached to the SPI bus.

Is I2C or SPI faster?

I2C is slower than SPI. In comparison to I2C, SPI is faster. I2C draws more power than SPI. Draws less power as compared to I2C. I2C is less susceptible to noise than SPI. SPI is more susceptible to noise than I2C. I2C is cheaper to implement than the SPI communication protocol. Costly as compared to I2C.

https://www.youtube.com/watch?v=HRi-J9TdE48